LoomTally home

Measurement guide

Measure the usable ground.

Record count and width on the actual piece. A nominal overall width tells you little about trimmed edges.

How to measure needlepoint canvas

  1. Orient the sample

    Mark the warp and weft on the reverse. Keep both original edges on your reference when possible.

  2. Count both directions

    Mark two inches away from the edge. Count complete mesh intervals and divide by two for mesh per inch. Repeat at the left, middle and right.

  3. Separate the two widths

    Record overall width edge to edge. Then measure between the two usable boundaries and describe what you excluded.

  4. Keep the evidence

    Photograph the scale in the same plane as the cloth. Record sample ID, position and date beside the readings.

Continue your selection.

Review the 18-mesh target