For print studios
Check the feed.
Read the grid.
Check the feed width and clearance your printer requires. A useful swatch has room for the feed margin and a test image you can judge against the mesh.

In the studio
Define the feed requirement
Record the smallest piece the equipment accepts, feed direction, usable width and any backing.
Print registration marks
Place a line and a cross at the center and corners. Record the ink system, print direction and drying routine.
Inspect and stitch
Compare line placement across the ground. Stitch the printed and bare areas and photograph the positions that shifted.
Starting specification
The first LoomTally development target is 18-mesh white cotton mono. A different construction or count can be recorded as a separate requirement.